UNICO is successor to the legendary edge sanding machine RANDMEISTER with innovative technology and an optimised ergonomic design. The wide wheelbase ensures absolute guidance stability, the guide tube is vertically adjustable and fitted with a swivelling guide handle. There is an optional handle located near the sanding disc.
The ELAN is the light and flexible universal machine popular with both professionals and rental companies. With its low machine weight and extraordinary manoeuvrability, the ELAN is not only extremely suitable for sanding edges and areas of wooden flooring underneath radiators, but for wooden staircases as well.
FLIP® means maximum efficiency for perfect, comfortable sanding of edges and corners without shoulders. The heart of the FLIP® is the powerful motor with its enormous suction power and corresponding reserves. The unexpectedly handy weight of the FLIP® is due to the abrasion-proof, glass-fibre reinforced plastic used in the motor casing, handle and attachment.
The TRIO is the versatile and powerful floor sanding machine in floor finishing. From thorough sub-floor treatment via renovation work on pre-finished parquet floors to perfect fine and intermediate sanding, the three disc sanding machine covers a comprehensive spectrum.
The high-performance floor sanding machine with 300 mm sanding drum width has been designed for the efficient finishing of large-scale areas in public buildings.
The Festool ETS EC 150/3 random orbital sander is the ideal sander for fine and extra fine sanding. It's compact and lightweight design makes all day work tireless. With an EC-TEC brushless motor, the tool uses power more efficiently and requires less maintenance.
The Festool vacuum clamping system makes the seemingly impossible become possible - clamping without limits. The proven vacuum-based suction clamping provides a highly effective and ergonomic work platform for any project with non-porous work pieces up to 30 kg and 1 m². High quality plastic pads ensure no marks are left behind, even on highly polished surfaces, and the lightweight, compact unit is easily transported in a systainer.
The cordless TSC 55 Plunge Cut Saw has an impressive speed of 5,200 revolutions per minute, allowing for perfect cut quality and fast working. It can operate with two 18V battery packs for maximum power or one 18V battery pack for low weight flexibility. MMC electronics provide soft start up and constant speed under load. The saw sits easily on a guide rail for perfect straight guidance and exact cuts, even on an angle.
The SSU 200 Univers Sword Saw cuts all standard materials used in the timber construction industry from wood to hard insulating materials, providing precision cuts up to 200 mm deep with ease. The FastFix interface allows you to change or tension the chain in no time, without tools. A variety of chains are available for different applications including a universal chain which is ideal for rip and cross cuts, a longitudinal chain which is perfect for rip cuts and an ISO chain for cutting both flexible and compression resistant insulation materials.
The cordless and compact RTSC orbital sander gives you unparalleled mobility and freedom of movement when working. It has a 2 mm sanding stroke and is ideal for achieving an outstanding surface quality when finishing or pre sanding. The powerful 18V Ergo battery pack with 3.1 Ah ensures cordless freedom with plugged-in performance. The battery is the key to an extremely compact design with balanced weight distribution and perfect ergonomics, weighing just 1.4 kg.
Weighing in at just 1.2 kg with perfectly balanced weight distribution the RTS 400s compact ergonomic design makes work easy and non tiring. Finish faster with up to 25% higher rate of material removal. The new MMC control electronics ensures that no load speed equals working speed, transmitting the 250 W of power directly onto the working surface.
The RS 200 direct drive orbital sander is designed to produce an outstanding fine sanding finish over large surfaces. It's 2.4 mm sanding stroke, direct drive and the ability to sand into corners, along three edges of the sanding pad, make it the ideal machine for light sanding of doors or large furniture surfaces. The balanced centre of gravity and additional hand grip mean you can work all day on vertical surfaces without tiring.
The RS 100 CQ gear driven sander with reduction gearing has been designed for heavy duty material removal. It's 5 mm sanding stroke makes it the perfect tool for sanding old, thick and stubborn coatings on large surfaces. Cleverly designed so that all switches are easily accessible with one hand, it's balanced centre of gravity and side handle mean you can work all day on vertical surfaces without tiring.
The RO 150 Random Orbital Sander with unique ROTEX principle is the ultimate all rounder for large coarse sanding, fine sanding, and polishing tasks. It's outstanding material removal rate and large 150 mm pad diameter guarantee fast progress on any work piece. The eccentric motion produces a perfect fine finish, and then switch back to rotary mode for efficient, hologram free polishing.
The PSBC 420 is part of the CARVEX range of jigsaws. The PSBC 420 Jigsaw delivers 3,800 strokes per minute and unbeatable profile cutting capacity. The optimised third saw blade guide with parallel adjustable carbide jaws achieves perfect results, regardless of the properties and thickness of the material.
The PF 1200 aluminium composite milling machine is the perfect solution for anyone working regularly with aluminium composite panels such as Alucobond, Alupanel or Dibond. In combination with a guide rail, the PF 1200 aluminium composite milling machine is ideal for mobile exhibition and façade construction applications.
The EC-TEC brushless motor puts the PDC 18 cordless hammer drill in a class of its own in terms of torque and speed in one drill. The addition of a hammer mode that can be engaged makes it perfect for masonry jobs with 76,000 bpm.
The OF 2200 router offers the most powerful low end torque, highest routing precision, and top ergonomic comfort. Producing a massive 2200 W of power, even routing the thickest, hardest materials is performed to perfection.
The OF 1010 router is the ideal compact tool for profiling, trenching, rebating and routing dovetails. It's lightweight and balanced, ergonomic design makes it perfect for one handed operation. MMC electronics adapt the machine to the working material and provide temperature monitoring, protecting your investment.
The MFK trimmer is one of the most cost effective tools money can buy. Simply change the router base, rather than reaching for a different tool and you will be equipped to handle any tasks involving edges and corners. Attach the appropriate base in a few simple steps and straightaway you’re ready to trim veneers or rout grooves, round over edges, create edge profiles and more.