Get Your Parcels There in Time for Christmas! Last dates to send:
Gold Coast
All areasMon 21 Dec
QLD
MetroFri 18 Dec
RegionalThu 10 Dec
NSW & VIC
MetroThu 17 Dec
RegionalTue 8 Dec
WA, SA, TAS
MetroThu 10 Dec
RegionalMon 7 Dec
Logo

Unlock a Free Gift

Spend more, get more! FREE T-Shirt at $250 — or upgrade to a Hoodie at $500 instead.

$250
$0.00 $500 goal

Bostik Ultra Level C700 Feather to 50mm – 20Kg Bag

Bostik ULTRA LEVEL PLUS C700 is high flow cement based self-levelling underlayment formulated to achieve maximum flow without any shrinkage or cracking. Results in a smooth level surface with ease of application Application thickness featheredge – 50 mm.

– Single component product, just add water
– Fast application, single operation
– Carpet or tile may be applied after 24hours
– Can be applied directly onto prepared concrete surfaces.
– Pumpable or manual application – high flow
– Good pot life and working time

SKU: 30616841 Category:

$39.50

4 People watching this product now!

Payment Methods:

Payment Methods
Standard Delivery

Standard Delivery

QLD, NSW, VIC Metro: 2 - 6 business days
NT, SA, WA, TAS & Regional: 5 - 15 business days

Express Shipping

Express Delivery

QLD, NSW, VIC Metro: 1 - 3 business days
NT, SA, WA, TAS & Regional: 3 - 7 business days

*Dispatch: Same day Monday - Friday 8am - 3pm. Friday cut off 2pm if stock available. If stock unavailable you will be contacted right away between above times.

Additional information

Weight20 kg
Brand

Shipping & Delivery

Pickup Package Icon

Pick up

Pick up at our main store or from many different depots around Australia.

Post & Freight

Post & Freight

Local Couriers or General post straight to your door

Local or regional icon

Local or regional

Local delivery by one of our vehicles or we will arrange one close to you

More about the product

Uses

– Levelling new and old concrete substrates
– Recommended underlayment for all Commercial & Domestic Vinyl, Carpets, Timber / Laminates, Tiles
– Residential, commercial and medium industrial application.
– New construction and refurbishment
– Internal

Application

Substrate and Surface Preparation
– Ensure the concrete substrate is clean and free from oil, grease, sealers, curing compounds, paints, polymer coatings, dust or other foreign (bond breaking) matter.
– Excess bitumen, adhesive or laitance should be removed by light scabbling or mechanical captive shot blasting or grinding, followed by vacuuming to remove debris and dust.
– Large cracks or holes may be filled using Bostik ULTRA LEVEL RAMP C920 in accordance with the Technical Data Sheet.
– For concrete substrates that contain greater than 5.5% moisture content or are subject to greater than 70% relative humidity, rising damp or moisture, it is recommended that Bostik ULTRA MOISTURE SEAL E500 be applied as a vapour barrier. Refer to the Bostik ULTRA MOISTURE SEAL E500 Technical Data Sheet. Floors treated with Bostik ULTRA MOISTURE SEAL E500 should be treated as a non-porous surface and primed with Bostik ULTRA PRIME GRIP A520.
– Always Refer to the primers Technical Data Sheet for more information.

Prior to carrying out the application the substrate must be primed with:
– Porous Substrate: Must be primed with Bostik ULTRA PRIME A510 Concentrate.
– Non Porous: Must be primed with Bostik ULTRA PRIME GRIP A520 .

Mixing

Bostik ULTRA LEVEL PLUS C700 requires between 4.8-5.0 litres of potable water per 20 kg bag and is best mixed with a forced action, high shear stirrer, powered by a heavy-duty electric mixing drill at approx. 600 r.p.m.
– Add pre-measured water to a clean mixing bucket.
– Gradually add Bostik ULTRA LEVEL PLUS C700 into the water whilst continuously mixing the contents of the bucket. When the entire contents of the bag have been added to the water, mix for a further 2-3 minutes to produce a smooth homogenous and fluid consistency.

Placing

Primed areas should receive the Bostik ULTRA LEVEL PLUS C700 as soon as possible to avoid dust and surface contamination affecting adhesion of the Bostik ULTRA LEVEL PLUS C700 to the Primer.
– Pour the mixed material on the primed substrate. Depending on desired thickness, either allow material to seek its own level or spread the material with a steel trowel, spreader or squeegee. Keep the trowel slightly inclined to obtain desired thickness.
– Pour the next mix of material. To ensure uniform consistency and flow application, it is advised that subsequent mixes are ready to enable continuous pouring.
– For very large areas, Bostik ULTRA LEVEL PLUS C700 can also be applied using an automatic pump. (Consult Bostik for further information).

Curing

Protect the finished area against damage during curing. To avoid too rapid drying protect from direct sunlight or drying winds during actual application, and while curing for up to 12 hours.

Coverage

A 20kg bag of Bostik ULTRA LEVEL PLUS C700 mixed with 4.8 litres of potable water will yield approximately 12 litres. To determine the number of bags needed per m2, use the formula: No of Bostik ULTRA LEVEL PLUS C700 bags

Clean up

Bostik ULTRA LEVEL PLUS C700 should be removed from tools and equipment with clean water immediately after use.

Storage & shelf life

Bostik ULTRA LEVEL PLUS C700 has a shelf life of 12 months in unopened bags. Must be stored in a cool dry elevated place and protected from humidity.

Important notes

– Bostik ULTRA LEVEL PLUS C700 must not be used in areas subject to occasional or permanent wetting or where backwater pressure is likely.
– Bostik ULTRA LEVEL PLUS C700 is not designed as a wearing coarse, scratch coat or as a water-proofing agent, and should only be used as an underlayment
– If substrate on to which Bostik ULTRA LEVEL PLUS C700 is applied moves or cracks, reflective cracking will occur in the Bostik ULTRA LEVEL PLUS C700
– For large and thick sections it is advised to check the moisture content of Bostik ULTRA LEVEL PLUS C700 prior to application of floor coverings Check concrete substrates for moisture content prior to application of Bostik ULTRA LEVEL PLUS C700
– For new concrete surfaces, it is recommended they must be at least 21 days old prior to application of Bostik ULTRA LEVEL PLUS C700
– Do not mix by hand.
– Do not add excess water.
– If Bostik ULTRA LEVEL PLUS C700 is over-watered, do not place it onto the substrate. It must be discarded. In all cases, test areas must be performed to ensure suitability of the product for the intended use.

Voc

SCAQMD VOC % <1 US RULE 1168 VOC g/L <1

Precuations in use

Complete details on each of the products mentioned are available on the product Safety Data Sheets. To ensure no harm is caused to persons using Bostik products, it is recommended that all concerned read the appropriate Safety Data Sheets. Visit www.bostik.com/australia for copies.

Do you want to choose the perfect floor for your next project?
Visit Us: 1/30 Lawrence Drive, Nerang, QLD. Australia

Marques Flooring Logo

A wide variety of flooring materials and supplies

We have the largest variety of flooring, machinery and installation tools, floor care products, sanding products, sub-floor products and flooring accessories in Gold Coast, Northern NSW & Brisbane. Choose from the numerous types of flooring under the following categories:

Wide product range

We stock all the most popular brands, finishes and styles in the market carefully selected in the last 30 years. All of our products come with a Quality Guarantee and training where required ensuring the products are used to provide the best results.

Plus, we have everything in stock you need to install, sand or coat your flooring, including machinery hire. Whether you’re a flooring installation contractor or a weekend do-it-yourselfer, trust Marques Flooring for all your flooring needs.

Our network

We are the number one resource in Northern NSW, Gold Coast & Brisbane for timber flooring and as we are supply only we also have a trusted network of installation and finishing companies who we are proud to recommend assisting with the on-site labour.

Trust our network of installers to do the installation job on any type of bamboo, cork, laminate, vinyl, timber, hybrid or engineered timber flooring thoroughly, professionally and correctly. Having spent many years in the flooring industry, we work closely with the industry to ensure we can bring you the best flooring experience possible.

Serving all of norther NSW, Gold Coast, Brisbane and further!

With our huge network of freight companies couriers and our own delivery vehicles, we can arrange for flooring and supplies to delivery anywhere in Northern NSW, Gold Coast or Brisbane. No matter the size of your order, we can make sure it arrives safely when you need it.

For everything you could possibly need or want in quality flooring and installation supplies, get in touch with Marques flooring. We are on-call 07 784 665